Product Detail
The orthopedically designed four section sleep deck can be placed into the following commonly needed positions: Contour, Fowler and Semi-Fowler, Frame Trendelenburg and Reverse Trendelenburg, Cardiac Chair, Nursing or Feeding, Vascular.
• Sleep Deck Low Height 15.50"
• Sleep Deck High Position 26" - with a 6" mattress meets stretcher height at 32"
• Built in Stabilizer Legs (Lifts bed off casters in low position - prevents bed movement)
• Staff Control Panel at foot end of bed, allows total operation of all bed function as well as lock out of patient pendant if desired
• Auxiliary crank for power failure emergencies
• Traction frame adaptor is standard on beds with blow molded Hd / Ft bds.
Traction frame adaptor is an extra cost option on beds with laminate Hd / Ft bds.
• Standard with Link Spring Fabric Deck (above picture shown with optional perforated steel pan deck)
• 5" Caster System. 1 Total Lock, 1 Steer, 2 Swivel.
• Six Integrated IV Sockets (2 - ½" and 2 - ¾" sockets at head; 2 - ½" at seat) on the Alpha beds with Blow Molded Hd and Ft but only four IV Sockets on the Alpha beds with laminate Hd and Ft bds.
• Removable high impact polypropylene foot and head panels with built in tubular push bars for safe and efficient transport or Decorator Laminate Panels
• Uni-body undercarriage is a welded base for strength and durability
• Standard 115 volt UL2601-1 and CAN/CSA C22.2 No. 6014-M90 Approved
• Motor drive units are AC powered with 110/115v or optional 220/240v; all are UL listed.
• Optional 240 Volt available
• Warranty: Electronics: 2 Years - All other components: 15 Years
• Weight Capacity is 450 lbs. (evenly distributed).
The Alpha Sub Acute and all Long Term Care beds are sold a la carte; Head and Foot Boards, Assist Devices, mattresses and options/accessories are sold separately.
The Alpha Sub Acute Bed as pictured is the version with the Push Bar style Head and Foot Boards. Flat laminate panel head and foot boards are also available if the bed is ordered to accept the laminate panels. Both styles Head and Foot Boards are sold separately and are not interchangeable.
SKUs
Please note that the pictures and descriptions on this page are representative of the product class. The stock codes below may be the product itself, or they may be associated stock codes related to the product being displayed. Please read the stock code description below to ensure you are ordering the correct item. Please call customer service if you have any questions regarding the correct stock code to choose.
Stock Codes
Item: AB29350CCR
Description: Head and Foot Boards, Center Crown style laminate panels, Windsor Mahogany Finish, for use with AL75000 Embedded Staff Control which must be ordered separately
Color:
HCPCS:
UPC: 000000000000
Packaging: EA
|
|
Item: AB04300CCR
Description: Head and Foot Boards, Wild Cherry with Center Crown
Color:
HCPCS:
UPC: 000000000000
Packaging: ST
|
|
Item: AB80300
Description: Head and Foot Boards, Rectangular laminate panels, Montana Walnut Finish
Color:
HCPCS:
UPC: 000000000000
Packaging: EA
|
|
Item: A7050
Description: Half Foot Rails (Set)
Color:
HCPCS:
UPC: RAIL, 1/2 RA
Packaging:
|
|
Item: 554-0658-000
Description: Factory-Installed options - Edema Foot Ratchet
Color:
HCPCS:
UPC: 000000000000
Packaging: 1EA
|
|
Item: 554-0190-000
Description: Panel-Mounted I.V. Holder
Color:
HCPCS:
UPC: 717076088336
Packaging: 1EA
|
|
Item: 554-0769-000
Description: Mattress Retainer Kit, for corners of beds, set of two each
Color:
HCPCS:
UPC:
Packaging: SET
|
|
Item: 554-0765-000
Description: Pendant Holster
Color:
HCPCS:
UPC:
Packaging: EA
|
|
SPECIFICATIONS
No specifications
Head and Foot Boards, Center Crown style laminate panels, Windsor Mahogany Finish, for use with AL75000 Embedded Staff Control which must be ordered separately
Head and Foot Boards, Wild Cherry with Center Crown
Head and Foot Boards, Rectangular laminate panels, Montana Walnut Finish
Factory-Installed options - Edema Foot Ratchet
Panel-Mounted I.V. Holder
Mattress Retainer Kit, for corners of beds, set of two each